By Charlotte Ainsworth / 1 August 2026

A Simple Method for Thick-Cut Potato Crisps

A Simple Method for Thick-Cut Potato Crisps

Why Thick-Cut Crisps Are Worth the Effort

Thin, shattering crisps have their place, but there is a particular pleasure in a crisp with real substance — one that audibly gives way, then yields to a soft, potato-forward centre. The method below is deliberately unglamorous. It asks for patience with water and heat rather than special equipment, and it rewards you with a batch that tastes unmistakably of potato rather than oil.

You will need a deep, heavy pan, a cooking thermometer, a slotted spoon, a mandoline or a steady hand with a sharp knife, a wire rack, and plenty of kitchen paper. That is genuinely it. Everything else is technique, and the technique is mostly about removing moisture before the oil ever gets involved.

Choosing the Right Potatoes

Start with floury, slightly mature potatoes. Maris Piper, King Edward, Rooster and Estima all work beautifully, giving a crisp that fries to a good golden colour with a tender interior. Avoid new potatoes: they are waxy and high in moisture, so they steam rather than crisp, and you will fight them all the way to the pan.

Sugar content matters as much as variety. Potatoes kept somewhere cold convert starch to sugar, and sugary slices brown long before they are cooked through. If yours have been in the fridge, bring them to room temperature for a few hours first. Choose firm, evenly sized tubers with no green patches and no soft spots.

  • Peel or not? Leaving the skins on gives rustic, slightly curled edges and an earthier flavour. Peel if there is any damage or greening.
  • Size: Larger potatoes give you longer, more even slices and fewer awkward offcuts.
  • Freshness: Older potatoes fry better than very fresh ones, as long as they are still sound.

Slicing Evenly, Rinsing Thoroughly

Aim for slices between 3mm and 4mm thick. A mandoline makes this almost effortless, but the crucial point is not the exact measurement — it is consistency. A 2mm slice cooks in roughly half the time of a 4mm one, so a mixed batch will always give you some crisps that are burnt and others that are pale and floppy.

As you slice, drop the pieces straight into a bowl of cold water. When the bowl is full, rinse them two or three times until the water runs clear. This is not optional. Surface starch gelatinises in hot oil and glues slices together, and it also clouds the flavour and dulls the finish.

Leave the slices to soak in fresh cold water for twenty to thirty minutes. If you are working with particularly thick slices, you can blanch them for three minutes in simmering salted water and then drain thoroughly, which cooks the centre and guarantees a crisp that shatters rather than bends. For most batches, the cold soak is enough.

Drying: The Step Everyone Skips

Drain the slices and spread them over a clean tea towel. Pat them dry, then move them to a wire rack or a second dry towel and leave them for fifteen to twenty minutes to air-dry. They should feel tacky and dry to the touch, not damp.

Any water left on the surface will hiss violently when it hits the oil, drop the temperature sharply, and prevent the crisp crust from forming. This single step separates a decent batch from a disappointing one, and it costs you nothing but time.

Frying in Batches, Twice

Fill a deep, heavy pan no more than a third full with a neutral oil — rapeseed, sunflower or groundnut. Never leave a pan of hot oil unattended, and always fry with an extractor fan on or a window open.

  • First fry: Heat the oil to 150°C. Add a single layer of slices, no crowding, and fry for two to three minutes until they are floppy and pale — cooked through but barely coloured. Lift out and drain on the rack.
  • Second fry: Raise the oil to 180–185°C. Return the slices in small batches for 60 to 90 seconds, until deep golden and the furious bubbling subsides to a quiet fizz. That change in sound is your best cue, far more reliable than a timer.

The two-stage approach is what makes thick crisps work. The first fry drives out moisture and cooks the interior; the second crisps the surface and colours it before the middle has any chance to burn. If you would rather fry once, hold the oil at 165°C and accept a paler, slightly less brittle crisp.

Seasoning While Hot

Salt the moment the crisps come out of the oil, while a film of heat still clings to them. Fine sea salt works best here; flaky salt simply bounces off. Toss them in a wide bowl rather than shaking seasoning over the pan, so every crisp gets an even coating.

For a vinegar tang, use vinegar powder or a light dusting of citric acid alongside the salt — liquid vinegar will re-soften everything you have just achieved. Smoked paprika, cracked black pepper, garlic granules and finely chopped rosemary salt all work well, provided the seasoning is dry. Add it in small amounts and taste as you go; crisps are salty little things and it is easy to overdo it.

Common Pitfalls and Storing the Results

Most problems trace back to moisture or temperature. Soggy crisps usually mean insufficient drying, oil that was not hot enough, or too many slices in the pan at once. Crisps that are dark outside and raw within point to oil that is too hot, slices that are too thick, or potatoes with a high sugar content. Greasiness comes from a temperature drop when the batch goes in, which lets oil soak into the potato instead of sealing the surface. Clumping almost always means the starch was not rinsed away properly.

Cool the finished crisps completely on the rack — never in a heap, where trapped steam will undo your work — then store them in an airtight tin lined with kitchen paper. They are at their best within two days and perfectly good for three to five. If they do soften, spread them on a tray and warm them at 150°C for five minutes; they will crisp up again quite happily.

Avatar

Jhon Bentham

Hi, my name is Anthony kuber. I am artist and fashion designer.
I love to travel and writing blogging.

Write your opinion

Your email address will not be published. Required fields are marked *

Top Picks
      
Avatar

Diva Gonzales

Software Developer & Writer

Hey, I'm Diva, a developer and writer blending code and creativity. I'm driven by a deep curiosity and a relentless pursuit of excellence. Join me as I craft digital solutions and captivating stories.

Banner Ad

Subscribe

Be the first to access exclusive content and expert insights by subscribing to our newsletter!